Protective Plumbing Devices

For more informationCall 905-546-2489 orEmail [email protected]

For a water or wastewater emergencyCall 905-546-2489

During heavy rain storms, the sewer system can reach capacity and become overloaded. This increases the risk of basement flooding caused by sewer surcharge. The Protective Plumbing Program is part of the City’s strategy to help residential property owners mitigate basement flooding.

Basement flooding as a result of a sewer backup could occur if the sewer system becomes overwhelmed with stormwater during a heavy rain storm. By installing a backwater valve, property owners can effectively reduce the risk of basement flooding due to storm related sewer backups. Backwater valves are designed to only allow wastewater to flow in one direction, from your home to the city sewer. In the event of a sewer backup, the backwater valve flap closes, preventing anything from flowing in or out of your sewer until the sewer backup subsides and the flap reopens.

When a backwater valve is working during a sewer backup, wastewater is prevented from backing up into your basement. This also means that wastewater from your home cannot leave through the sewer while the valve is closed.

Backwater valves covered by the Protective Plumbing Program:

Mainline Fullport​​​​​​​The Mainline Fullport backwater valve is the standard backwater valve as shown in the pictures above. This valve is typically installed in basements where the sewer is less than 2 feet in depth and is located in an area that is accessible for servicing.

Adapt-a-Valve​​​​​​​The Adapt-a-Valve backwater valve was designed for homes where access to the sewer pipe is greater than 2 feet. It functions the same as the standard Mainline Fullport backwater valve but has a long access pipe which allows for easy access for cleaning and maintenance.

Backwater valves require regular cleaning and maintenance to ensure that the valve continues to function properly. You should check your backwater valve every 2 to 3 months or before a heavy rain storm.

The following items can clog pipes or tangle into massive knots that can damage the sewer, cause sewer backups and cause your backwater valve to not function properly. Please dispose of these items to protect the sewer system and your backwater valve.

Backwater valves need to be checked every 2 to 3 months or before a forecasted heavy rainfall. This will ensure that the valve is functioning properly. Debris found in the valve will most likely prevent it from function properly. When conducting any maintenance, always wear protective gloves and eye protection.

Most Popular Version. It’s generally installed in the basement of the house.

Less Popular Version. This valve could be installed outside in the yard, driveway or in the basement.

If you have difficulty maintaining your backwater valve, you may wish to consult a plumber or drain contractor to inspect and maintain your backwater valve.

During heavy rain storms, sewer systems are at risk of reaching capacity and becoming overwhelmed, which poses a risk to flooding basements and overflows into the environment with untreated stormwater and wastewater. Disconnecting downspouts that are connected to the sewer system and land applying rain water reduces the amount of stormwater in the sewer system which decreases the chance of an overflow event and basement flooding. Whenever possible downspouts should be disconnected from the City sewer system when installing a backwater valve.

A downspout disconnection is the process by which your downspout is cut approximately 9 inches above the standpipe and then the standpipe is then capped. An elbow and downspout extension of at least 48 inches in length is installed to redirect the discharge water to ensure that it does not create standing water, erosion, or other damage on the property or an adjoining property. Learn more about Downspout Disconnections.

If downspout disconnections are completed by one of the pre-qualified contractors, either in conjunction with the installation of a backwater valve or not, the property owner will be eligible for a reimbursement of $75 per downspout. The grant maximum is $2000 for any of the combined eligible works under the Program. Learn more about the Grant Program.

The installation of a sump pump may be beneficial in preventing basement flooding as the sump pump will transfer water from the basement to the ground surface outside the home. Where a new sump pump and pit along with a backwater valve is installed a total grant amount of $2,000 will be made available to property owners. This does not refer to, or include, the replacement of existing sump pumps or pits.

Please note, the City offers a Protective Plumbing Plumbing Loan Program up to a maximum of $2000 to assist with eligible costs, including the installation of a sump pump in conjunction with the installation of a backwater valve, that exceed the Protective Plumbing Program Grant Program.